Performing Front Housing Kit Troubleshooting; Performing Miscellaneous Troubleshooting - Motorola MXP600 Manual

MN006362A01-AL
Chapter 8 : Radio Leak Test
6 Perform one of the following actions:
If...
Pass
Fail
7 Proceed with Performing Front Housing Kit
8.2.3

Performing Front Housing Kit Troubleshooting

Procedure:
1 Replace the front housing kit, and reassemble the radio.
NOTE: Ensure that the main O-ring, battery connector seal, and SIM card door seal are
not pinched during assembly.
2 Perform leak test following the steps from
3 Perform one of the following actions:
If...
Pass
Fail
4 Reassemble the front housing kit on to the golden sample kit, and perform the vacuum leak test
again.
5 Perform one of the following actions:
If...
Pass
Fail
6 Proceed to Performing Miscellaneous
8.2.4

Performing Miscellaneous Troubleshooting

Procedure:
1 Reassemble the whole radio.
Leakage may be due to improper assembly.
2 Repeat Performing Leak Area Troubleshooting
166
Then...
Bottom connector sub-assembly can be re-
used.
Scrap the bottom connector sub-assembly.
Troubleshooting.
Performing Vacuum Leak
Then...
Troubleshooting ends here.
Continue to the next step.
Then...
Front housing kit is good for reuse.
Scrap the front housing kit.
Troubleshooting.
with a second golden sample set.
Test.