My16-Cii Serial Control And Latency Settings - Yamaha MY16-CII Owner's Manual

For yamaha my16-cii network i/o card

Hide thumbs Also See for MY16-CII:

Table of Contents

2.1. MY16-CII Serial Control and Latency Settings

Figure 17: Yamaha Device Settings Window

Roll your cursor over the Rx or Tx field to see an edit box that allows you to select a serial

channel to be used for reception or transmission. Use the up and down arrow buttons on the right

side of the edit box to select the desired channel. The available range is OFF or 1-15. Data

transfer becomes possible when the channels of the transmitting and receiving devices are

matched. No transmission or reception takes place when OFF is selected.

Hint: As an example, serial control is used for remotely controlling a DME64N from the PM5D.

Figure 18: Rx/Tx Serial channel edit box

Click on the "Bit Length" field to change the audio bit length to be transferred via the CobraNet

network. A popup menu will appear allowing you to select "Bit Off", "16bit", "20bit", or "24bit".

Figure 19: Bit Length popup menu

CobraNet Manager Lite for Yamaha Owner's Manual

Table of Contents

Cobranet manager lite