Yamaha MY16-CII Owner's Manual page 14

For yamaha my16-cii network i/o card

Hide thumbs Also See for MY16-CII:

Table of Contents

Note: Don't change the value in the Tx "Ch" field. The communication load can be reduced by

changing this parameter, but some audio channels will become inoperative. To reduce the

communication load without disabling the audio channels, edit the "Channels per Bundle"

parameter in the "Yamaha Device Settings" window (page 18).

To refresh the display to show the current device settings click [Get information from

device].

Make sure that the "Persistence on" checkbox is checked.

Note: When "Persistence on" is checked the CobraNet settings are retained even when the

power is turned off. If this checkbox is unchecked the settings will be initialized when the power is

turned off.

This completes MY16-CII bundle setup. The MY16-CII can now be used for audio signal transfer.

For information on setting MY16-CII latency and other detailed settings refer to "2. MY16-CII

Device Settings" on page 16.

CobraNet Manager Lite for Yamaha Owner's Manual

Table of Contents

Cobranet manager lite