Advertisement
The Memory function provides you with an easy way to quickly recall a preferred setting
or combination of functions. Simply press a Memory button and then the Start button.
The principle of the Memory function is to store whatever function and setting that is
currently displayed.
When the appliance is plugged in or after a power failure, your oven memories will have
stored the following:
M1 - 2 minute and Power level 10
The memory is fully re-programmable. To re-program the Memory, select a function and
make the necessary settings. Keep the Memory button pressed until an acoustic signal is
heard. You may re-program the memories as many times as you wish.
g"
£
Weal
10
1. Press the MEMORY button.
2. Press the START button.
When the memorised program has ended the oven stops
automatically and an acoustic signal is heard.
How to re-programme the memory
Lets say we wish to cook some items for 1 minute at Power Level 5.
1. Press the + / - buttons to set the cooking time.
2. Press the Power button until 5 is displayed.
3. Press the MEMORY button until an acoustic signal is heard.
(Approximately 2 seconds).
4. Press the STOP button.
The Memory has now been programmed. To check what is stored,
simply press the Memory button again and the Memory content is
shown on the display.
Note: When new values are stored in the Memory the old Memory
content is erased.
Advertisement
