Kenmore 911.95402000 Use & Care Manual page 28

CARE ANDCLEANING
RemovableParts
CLEANING MATERIALS
= Dishwashing detergent
* Warm water
* Soft cloth
Molded
._ib GrColoevaer in.
Spring
Clip
TO REMOVE
1. Be sure the control knob is in
the off position.
2. Putt straight off the stem
Using a piece of string can make
removing the knob easier. Slip the
string under and around the knob,
pulling straight out
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft
cloth. DO NOT let the knob soak.
TO REPLACE
1. Check the back of the knob, The
molded rib of the knob is de-
signed to fit perfectly onto the
knob stem.
2. Align the molded rib to the clear
groove in the knob stem.
3, Push the knob back as far as it
will go.
_ AUTION: Disconnect
electrical power to the
oven at the main circuit
breaker or fuse box before
attempting to replace the oven
light bulb. Do not touch a hot
light bulb with wet hands or a
wet cloth. Wait until the bulb has
cooled and use a dry cloth,
_. .4
Bail _.___ ive Collar
Wire *" ;'
Light Bulb
Bulb Cover J1_"_
TO REPLACE
Hold your hand under the bulb
cover and firmly push back the
bail wire, until it clears and
releases the bulb cover
2. Unscrew the light bulb.
3. Replace the bulb with a 3W'
40-watt appliance bulb
4. Place the bulb cover into the
grooves of the socket and pull
the bail wire forward until it rests
in the indentation on top of the
bulb cover
28