Honeywell MPA2C3 User Manual page 71

1. Navigate to the Output Groups tab: Click Panel Configuration
Figure 2-33 Configuring Output Groups
2. Click to
3. Configure the following for each output group:
Table 2-12
Setting
Name
Pulse Time
Latch
Energized
Disable Interlocks
4. Click toggle(s) to select outputs. Click the Choose Outputs toggle to select all
5. Click Save.
MPA2C3 User Manual
Groups
.
add a new group.
Description
Enter a unique name for the group
Configure how long a device assumes abnormal status, such as a
horn sounding or a released door strike. In
hours:minutes:seconds. Maximum time is 1:45:59.
Toggles the state of the outputs between energized and de-
energized status upon every activation (code use, interlock, or
manual pulse).
Specifies the period during which the group of output relays are
automatically energized. Select a schedule (that you created in
Entering a Panel Name
list.
Specifies the period during which the interlocks that control the
group's outputs will be disabled. Select a schedule (that you
created in
drop-down list.
outputs.
section on page
section on page
Entering a Panel Name
>
) from the drop-down
42
) from the
42
Outputs
>
71