Miele DA 3160 Operating And Installation Instructions page 30

installation
4. Secure the appliance
[] Push the hood back so it sits flush
with the front of the spacer strip,
[] Pull the deflector out,
2x _ 4 x 30 mm
[] Screw the hood, with 4 screws, onto
the runners,
[] Remove the installation protection
between the deflector and casing,
[] Drill respective holes and screw the
fixing brackets to the wall or the
cabinet rear wall
[] Tighten the screws to the casing,
[] Connect the space bar from the rear
with 4 plastic rivets at the hood rear
side,
[] Loosen the screws of the fixing
brackets on the hood top,
[] Push the bracket flush to the wall or
the cabinet back wall,
3O