No Ring Tone/Alert Function - Motorola MotoRAZR maxx V6 Manual

Motorola GmbH, Mobile Devices, CSS Center
Title: Troubleshooting-Guide MotoRAZR maxx V6

No ring tone/alert function

Probable cause:
a) Faulty alert speaker (part of rear housing assy)
Verification: Remove rear housing assy and temporarily replace the rear housing assy with a
known good one. If the fault has been cleared, reassemble with new rear housing assy.
b) Faulty connection transceiver board assembly to alert speaker
Remove antenna assembly and check contacts. Temporarily replace antenna assy with a
known good one. If the fault has been cleared, reassemble with a new antenna assy.
Repair Support Information
Doc. No:
Version:
Date:
Page:
Figure 7
© Copyright 2003-2007 Motorola Inc. All Rights reserved.
Motorola internal use
TSG_3G_V6
1.0
23.07.2007
8 / 40