Holding A Call (Using Call Hold) - NEC UNIVERGE SV9300 User Manual

3.
Lift the handset to answer the call.
11:00 AM SUN 1 JUN 2014
MIC
HOLDING A CALL (USING
CALL HOLD)
This feature allows a terminal user to hold a call
in progress by pressing the Call Hold key. This
line can then be used for originating another call
or returning to a previously held call.
TO HOLD
Following explains how to hold a call in progress.
1.
While a call in progress,
Line key that is used during a call lights
green. →
Line key on the other terminals lights red.
→
11:00 AM SUN 1 JUN 2014
MIC Mute
2.
Press Hold key.
The person on the other end hears the
Music on Hold.
Line key that is placed on hold flashes
green. →
Line keys on the other terminals flash red.
→
HOLD
11:00 AM SUN 1 JUN 2014
3.
Replace the handset or make a new
TO RETRIEVE THE HELD
CALL
201
Following explains how to retrieve the held call.
201
It is possible to retrieve a call on hold from
another terminal that has the same Line key
flashing red.
IF UNANSWERED
201
62
FEATURE OPERATION
call.
1.
While holding a call,
Line key that is placed on hold flashes
green. →
HOLD
11:00 AM SUN 1 JUN 2014
2.
Press Line key that is placed on
hold.
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
MIC Mute
3.
Lift the handset and return to the
held call.
After predetermined time, Automatic
Recall is initiated and the user hears
Automatic Recall ringer tone. Default
time is one minute.
Starting time to ring Automatic Recall is
set by system data setting at initial
installation. For details, please contact
the system administrator.
201
201