(1) Hanger Hook
(2) Terminal
3.
Turn the terminal over, and then spread the Tilt Legs.
4.
Install the Wall Mount Unit on the wall or on the wall plate.
Select the one of the following procedures.
Mount Terminal on Wall using Wall Mount Unit
Attach the Wall Mount Unit to the wall using six screws or using two wall mounted screws.
(1) Wall Mount Unit
(2) Screws (Attached parts)
(3) Screws (Local supply)
(4) Wall Mount Unit
Mount Terminal on Wall Plate using Wall Mount Unit
Locate the screw holes on the base and hang the cover over the screws on the wall plate.
18
INTRODUCTION