NEC UNIVERGE SV9300 User Manual page 102

Hide thumbs Also See for UNIVERGE SV9300:
Table of Contents

Advertisement

EMERGENCY CALL
It is required to cancel the Security Mode before
making a call. But the emergency call is allowed
without canceling the Security Mode. Maximum 3
emergency numbers can be registered by
system data setting at initial installation.
This feature is not available when
"Security Mode" is not activated or no
emergency number is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1.
Security lamp lights red and
"Security Lock" is displayed.
(1) Security button.
2.
Lift the handset.
"Dial Emergency Number Only." is
displayed.
When you press Speaker key,
password entry screen is displayed.
The emergency call screen is displayed
by lifting the handset.
Emergency call cannot be made with
Speaker key.
3.
Dial the emergency number.
Example: Dial "911".
Maximum 3 emergency numbers are
set by system data setting at initial
installation. For details, please contact
the system administrator.
The user can make a call to only the
predetermined number. When numbers
other than the predetermined
emergency number are dialed, the
following message appears.
After a few seconds, the display goes
back to emergency call screen.
4.
The call is originated to the dialed
emergency number.
You will receive a ring back tone.
11:00 AM SUN 1 JUN 2014
Recall
5.
After a conversation, replace the
handset.
94
FEATURE OPERATION
911
VOICE
CB
>>>>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Univerge dt830gUniverge dt830dgUniverge dt830Itz-8ldg-3pItz-8ldg-3p whItz-12d-3p ... Show all

Table of Contents