Changing Settings For Each Fisheye Dewarped Video Stream - Motorola Avigilon H5A-FE Series User Manual

Changing Settings for Each Fisheye Dewarped
Video Stream
When you adjust the video image settings, you will typically see a tab for each camera head. To change
settings for a specific camera head, select that head's tab on the settings page and make the required
changes.
If no tabs are displayed, the settings apply to the camera as a whole.
The All Heads tab is only displayed on the Image and Display, Adjustments, and Motion Detection pages.
The All Heads tab on these pages allows you to change settings that apply to the whole camera and settings
that can apply to specific camera heads.
1. Select the All Heads tab to adjust the settings that apply to the whole camera. These settings include
Flicker Control and Enable WDR on the Image and Display page, as well as Saturation, Brightness,
Sharpness and Contrast on the Image and Display > Adjustments page.
2. In the All Heads tab, you can set the Imaging mode:
Select Global to apply the same settings to all camera heads. Use the settings listed in the All
l
Heads tab to adjust the camera image settings. The same settings for each numbered Head tab
are disabled.
Select Per-head to apply different settings to each camera head. Select the different tabs to
l
change the settings for each camera head.
3. Select each numbered tab to adjust the focus controls for each camera head. These settings must be
manually adjusted for each camera head.

Changing Settings for Each Fisheye Dewarped Video Stream

34