Table of Contents
Advertisement
For day/night switching controlled by an external digital input, the External option must be
selected as the Day/Night Mode. For more information on configuring the day/night mode, see
Image and Display on
d. Click Apply to save your changes.
Once the digital input is connected to the camera, you will see the connection status in the
Circuit Current State area. The status is typically Open or Closed.
2. To configure a digital output:
a. In the Digital Outputs area, enter a name for the digital output in the Name field.
b. Select the appropriate state from the Circuit State drop-down list.
c. Check the IRCF to Out box to allow the camera's IR Cut Filter to control the external output.
This feature is typically used when the camera is connected to an external IR illuminator. Once
enabled, the IR illuminator is turned on when the camera's IR Cut Filter is in monochrome mode.
d. In the Duration field, enter how long the digital output is active for when triggered. You can
enter any number between 100 and 86,400,000 milliseconds.
e. Click Trigger to manually trigger the digital output from the web interface.
f. Click Apply to save your changes.
Microphone
If a microphone is supported by the camera and is connected to the camera, you can adjust the gain on the
Microphone page. The higher the gain setting, the higher the microphone volume.
Enter a number between the available range displayed on the right then click Apply.
l
If you are configuring an Avigilon Fisheye camera, there are two fields available:
1. Internal Microphone Gain — configures the gain for the microphone that is built into the camera.
2. External Source Gain — configures the gain for any microphone that is connected to the audio input.
3. In either field, enter a number between the available range displayed on the right then click Apply.
Speaker
If a speaker is supported by the camera and is connected to the camera, you can adjust the volume on the
Speakers page.
Enter a number between 0 and 100 to set the speaker volume then click Apply.
l
Users
On the Users page, you can add new users, edit existing users, and change passwords.
Microphone
page 15.
30
Advertisement
Table of Contents
