Image And Display - Motorola Avigilon H5A-FE Series User Manual

Image and Display

Tip: Features and options are disabled if they are not supported by the camera.
Note: If a camera with video analytics or unusual motion detection is physically moved or adjusted,
or if the focus or zoom level is changed, reset the learning progress to provide accurate results. If the
camera's image rate and compression or display settings are updated, the learning progress may
reset automatically.
On the Image and Display page, you can control the camera's day/night and exposure settings.
The Image and Display page includes an image panel that displays the camera's live video stream. When you
click Apply to save your changes, the video stream is updated to use the new settings.
Below the image panel, the following information is displayed on the right:
Current Exposure
l
Current Gain
l
Current Iris
l
Last Known Light Level
l
Many Avigilon High Definition IP cameras have electronic zoom and focus controls, and you can set the
camera's zoom and focus through this page as well.
1. Use the Zoom slider to adjust the camera's zoom position.
To zoom out, move the slider towards the right.
l
To zoom in, move the slider towards the left.
l
2. To manually focus the camera, use the Focus buttons:
To focus towards zero:
l
Click << to take a large step.
o
Click < to take a small step.
o
Click 0 to focus at zero.
o
To focus towards infinity:
l
Click >> to take a large step.
o
Click > to take a small step.
o
Click Inf to focus at infinity.
o
Image and Display 15