Inch Hdd/Ssd And 2.5-Inch Installation Frame - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
▶ Fasten the 3.5-inch HDD with four screws.
Removing a 3.5-inch HDD from a 3.5-inch installation frame
▶ Please proceed in reversed order.
Concluding steps
No steps needed.
7.3.2

2.5-inch HDD/SSD and 2.5-inch installation frame

Installing or removing the installation frame is only necessary for Japan.
Customer Replaceable
Unit (CRU)
Tools: Phillips PH1 / (+) No. 1 screwdriver
Preliminary steps
No steps needed.
Installing a 2.5-inch HDD/SSD in a 2.5-inch installation frame
Figure 54: Installing the 2.5-inch HDD/SSD in the 2.5-inch installation frame (A)
140 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2540 M7