Table of Contents
Advertisement
(4) PROCESS
Move up and down
By pushing
MENU UP,DOWN
--
4
PROCESS
-GAMMA ON/OFF
GAMMA
BLACK GAMMA
2D LPF
DTL GAIN
DTL B. FRQ
M.
PED
CHROMA GAIN
DNR
Gamma correction
ON, OFF
Gamma correction level setting
-10 to 10
Black level gamma
LOW, NORMAL, HIGH
Two dimension low pass filter
ON, OFF
Detail gain setting
-7 to 7
Detail boost frequency setting
LOW, NORMAL, HIGH
Master pedestal setting
-50 to 50
Chroma gain setting
-128 to 127
Digital noise reduction
ON,OFF
(4. 1) Changing the gamma correction ON/OFF
(D
Set the
" to GAMMA ON/OFF by pushing [MENU UP], [MENU DOWN] buttons.
@ Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
When ON is selected, menu will show the GAMMA and BLACK GAMMA selections. When OFF is
selected, GAMMA, BLACK GAMMA, and 2D LPF disappear. So the setting for GAMMA, BLACK
GAMMA, and 2D LPF cannot be made. (2D LPF setting turns OFF.)
Menu when GAMMA OFF is selected.
Gamma correction
ON, OFF
Detail gain setting
-7 to 7
Detail boost frequency setting
LOW, NORMAL, HIGH
Master pedestal setting
-50 to 50
Chroma gain setting
-128 to 127
Digital noise reduction
ON,OFF
(4. 2) Changing gamma correction level
CD
Set the
to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
® Set the gamma correction level by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP]-► Correction amount becomes larger.
-
10
«-►
0
<
-►
10
Correction amount becomes smaller.◄- [DATA DOWN]
* When OFF is selected in GAMMA ON/OFF selection line, the display GAMMA turns off automatically.
So the gamma correction level change cannot be changed.
32
Advertisement
Table of Contents
