ML-13000
User's Manual
Basic Operations
Workflow till the Completion of Printed Materials
This section describes the workflow till the completion of printed materials.
Create the print data
Create print data using various design software and register the data to the RIP software.
See the following when using Epson Edge Print.
"How to Use Epson Edge Print" on page 47
U
Prepare the fabric
See the following for supported fabric.
"Supported Fabric" on page 383
U
Set the fabric and print
"Workflow for Proper Printing" on page 55
U
Fix the ink to the fabric
Use a dryer or similar device to fix the ink onto the printed fabric.
Prepare a dryer separately.
Workflow for Proper Printing
This section describes the operations for proper printing by dividing them into the following three parts.
❏ Operations before starting work
"Operations Before Starting Work" on page 56
U
❏ Print
"Printing Work" on page 59
U
❏ Operations before completing work
"Work After Printing" on page 119
U
Basic Operations
55