Editing Fabric Settings - Epson ML-13000 User Manual

ML-13000 User's Manual
is displayed for fabric settings that were copied from the source fabric settings list or whose settings
were changed on the Edit screen. If
the Apply button.
You can check the Fabric Name on the download screen by referring to Fabric Name displayed in Memo of
the parameters list (target).
E
Click the Apply button.
Fabric settings are copied to the printer.
Before clicking the Apply button, check the list of registered printers and make sure that
the status icon. If the icon is anything except for
If the printer is connected via USB, make sure it is not printing before you click Apply.
Loading EMX files stored to another computer into the source fabric settings list
By clicking , you can load EMX files to your source fabric settings list, no matter where they have been copied.
When you are using Epson Edge Dashboard on a computer that cannot download EMX files, you can load EMX
files that were downloaded on a different computer.
Click the icon to display the file selection screen, select the EMX files of your choice, and load.
A maximum of 300 EMX files can be loaded at a time. The fabric settings of the files that are loaded are added to
the source fabric settings list.
Once the files are loaded, going forward, you can simply select Local Media Library to see them listed.
Editing the source fabric settings list
Click to delete the EMX files that have been downloaded. In the source fabric settings list, select the EMX files
that you no longer use or that you downloaded by accident, and then click

Editing Fabric Settings

You can make changes to fabric settings selected on the target fabric settings list. You can also add new settings.
The steps to do this are described below.
A
On the target fabric settings list, select the fabric settings you want to edit. Click
(to create a new setting).
The Edit screen for Fabric Settings is displayed.
Before Use
is displayed, is grayed out and cannot be updated until you click
, you cannot update the printer's fabric settings.
45
is displayed as
.
(to change settings) or