Panasonic PAW-160MAH3M Installation Instructions Manual page 52

Installation
7. Once the setting procedure is completed, exit the "Detailed settings" mode by pressing the
4
52
"MENU" button several times. This will invoke a confirmation message (see below). Select
"YES" with the "UP" and "DOWN" buttons, and then press the "ENTER" button to finish the
"Detailed settings" mode and return to the normal remote controller screen.
Detailed settings
Exit detailed
Unit no. s
settings
and r estart
Code no.
YES
Set data
NO
[ ]
1-1
?
10
0001 0001
[ ]
AHU Kit – Installation Instructions – 07/2023