Table of Contents
Advertisement
ry
You can also print from a VCR or laser disc player.
Connect your VCR (or laser disc player) as follows:
Connect the printer's INPUT:
VIDEO to the VCR's VIDEO output
jack, using a video cable (not
supplied).
CLANC cable (not supplied
Video
}
cable (not
= > :Signal flow
if your VCR has an S VIDEO output
connector
Connect the printer's INPUT: S VIDEO to the
VCR's S VIDEO output connector, using the S
VIDEO cable (not supplied). This connection results
in better print quality.
If you use both S VIDEO connector and VIDEO jack
simultaneously, the printer automatically selects
the S VIDEO input as the input video signal.
If your VCR has a CLANC jack
Connect the printer's @LANC to the VCR's
CLANC jack, using the @LANC cable (not
supplied). The printer automatically stops the VCR
when you select the picture on the printer.
If your VCR has the LANC M/S
mode switching
function, set to "S" mode.
Note that the @LANC jack on this printer does not
correspond to CONTROL L or REMOTE jacks.
2 | Connect the printer's MONITOR
OUT to the TV's VIDEO input jack,
using the supplied video cable.
MONITOR OUT
VIDEO
?
Video cable (supplied)
,
:
VIDEO
=> :Signal flow
Connect the supplied AC power
cord to the AC IN jack of the
printer and a wall outlet.
To a wall outlet
<= eS
Note
You cannot use a television with an antenna input only.
(continued)
Getting Started
7
Advertisement
Table of Contents
