Sony CVP-M1 Operating Instructions Manual page 26

index to parts and controls
fy
'Remote commander
The supplied remote commander has the same basic operation buttons as the main unit.
Point the head of the remote commander toward the remote sensor on the printer. You can operate the printer with the
remote commander within 5 m (16 feet 5 inches) of the printer.
Transmitter
Point toward the remote sensor
to control the printer after
turning on the printer.
MEMORY RECALL SOURCE button (9)
button (9)
UPPER button STANDARD button (9)
(11)
LOWER button FIELD/FRAME button
(11) (9)
PRINT button (9)
Notes
¢ Keep the remote sensor of the printer
away from direct sunlight or the
strong light of lighting equipment.
¢ Be careful that there is no obstacle
between the printer and the remote
commander.
Installing the batteries
1 Push to open the lid. 3 Replace the lid.
Remote
sensor
| 2 Install two size AA (R6)
batteries as shown below. °
Note Approx. 15
To avoid damage from possible
battery leakage, remove the batteries
when the commander will not be
used for a long time.
Approx. 15°
For Your Information
26