Table of Contents
Advertisement
MPLS and RSVP-TE
An accounting policy must first be configured in the config>log>accounting-policy context
before it can be associated; otherwise an error message is generated.
The no form of this command removes the accounting policy association.
Default
no accounting-policy
Parameters
policy-id — the accounting policy ID
collect-stats
Syntax
[no] collect-stats
Context
config>router>mpls>ingr-stats>lsp
config>router>mpls>lsp>egress-statistics
Description
This command enables accounting and statistical data collection.
The collected statistic counters can be retrieved via show and monitor commands or with
the SNMPv3 interface. The counters can be saved to an accounting file if the specific
statistics collection record is included in the default accounting policy or in a user-defined
accounting policy.
If the no collect-stats command is issued, the statistics are still accumulated by the
forwarding engine. However, the CPU will not obtain the results and write them to the
accounting file. If a subsequent collect-stats command is issued, then the counters written
to the accounting file will include all the traffic that went through while the no collect-stats
command was in effect.
Default
no collect-stats
egress-statistics
Syntax
[no] egress-statistics
Context
config>router>mpls>lsp
Description
This command configures statistics in the egress data path of an originating LSP at a
head-end node. The user must also execute the no shutdown command in this context to
enable statistics collection.
The no form of this command disables the statistics in the egress data path and removes the
accounting policy association from the RSVP LSP.
Default
no egress-statistics
178
Values
1 to 99
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS Guide
3HE 18686 AAAB TQZZA
Advertisement
Table of Contents
