Hitachi CSNET MANAGER XT Installation And Operation Manual page 27

Installation
2.2.1 Wall Mounted (Optional)
C A U T I O N
This device cannot built in neither installed without providing ventilation to the aluminium sink behind.
Place the support on a resistant wall.
XT only. HITACHI offers the following wall mounted accessory, model code 7E512300.
2.2.2 Stand Mounted (Optional)
C A U T I O N
This device cannot built in neither installed without providing ventilation to the aluminium sink behind.
The stand comes disassembled in 2 parts:
1
2 Put the screen upside down and insert the 4 stand screws on the rear of the screen (the power source connector will be at the
bottom of the screen). There are 8 holes on the support, 4 for the LT screen and the other 4 for the XT screen.
C A U T I O N
21 PMML0409A rev.1 - 10/2016
4 screws
Base
Arm
Fixing screen
support
Screws
Fixing screen
support
Arm
Screen