Advertisement
(DVD Video)
Not play back
No picture on the monitor
No picture, no sound
Picture is distorted when the |
DVD video is switched back to |
the navigation screen.
Remote control does not work.
Menu editing cannot be done
with a video CD.
No text on the screen
No language switching in
play/text mode
Viewing angle unchangeable
DVD video sound volume is
too low, or is too high and dis-
torted.
Battery are connected wrong.
" | Volume setting is wrong.
not 2 or ALL.
Disc region No.
Disc is inserted upside down.
DVD is played back while dri-
ving
Screen is in RGB mode.
RCA cable is not correctly con-
nected.
Optional monitor is connected
|
to RGB terminal.
Batteries are week or dead.
The video CD has no playback
control.
You are watching a The DVD
that has no text.
Text is turned off
The disc contains more than
two languages.
Text is limited.
The disc does not contains
multiple viewing angles.
You haven't come to a scene
which permits angle change.
| Stop the vehicle is set the
Read the manual (for TV oper-
| terminal, then adjust screen
Use discs with region No. 2 or
ALL
Check if the disc was inserted
correctly.
parking brake, and then play
the DVD.
ation) and change TV mode to
video mode.
See the manual and check the
connection.
If itis connected to the RGB
position as described on page
19 of the manual for car navi-
gation operation.
Replace the batteries.
Insert the battery correctly.
Use a video CD with playback
control.
Check the package.
Turn text on,
Check the package.
Switch on the menu screen,
Some discs prohibit switching.
Check the package.
Some discs permit angle
change in only part of the disc.
Adjust the volume
Note:
It is recommended that you have information on the handling and care of map
discs.
For details, see the Handling and Care of Map Discs in the Manual for Car
Navigation Operation.
HSITDNA
a
Advertisement
