Advertisement
b
N
a
Vv
i
Preparing the System
for Initial Use
Automa
Distance Correction Check
The mobile navigation system calculates and indicates the vehicle position on the
map by multiplying the speed pulse emitted by the vehicle with a correction coeffi-
cient. The speed pulse emitted differs from the type of vehicle, and differences in tire
pressure and wear require a different correction coefficient even for vehicles of the
same type.
The system corrects distance deviations automatically based on GPS data. To be
able to use the system effectively in the following cases, make sure to carry out the
procedure described below.
c
2)
i
* Before initial use
* After a tire change
* After tire rotation
* When installing a navigation system previously installed
in another vehicle
4,
Press SET UP to open the [Set Up
Set Up Menu
Menu].
stor
On the [Set Up Menu], select
[Information] by moving the joystick,
and then press ENTER.
menu, select [Wiring Check], and then
press ENTER.
[i
Wing: Chacko
2 On the [Set Up Menu - Information]
Ss
M i = Information
Advertisement
