Advertisement
HOW TO RETRIVE DATA
Example:
8RCR
1110CR
No.1
BRCR
218CR
No. 2
|
|
i
|
I
{
8RCR
432:CR
No. 5
There were five dises cancelled in this example, and the
disc most often cancelled was disc no. 11, which was can-
celled ten times. The fifth most cancelled disc was disc
no. 43, which was cancelled twice.
(9) 1D No.
Format: 9RCR
The 11-digit ID No. is transmitted.
Example:
9RCR
12345678912:CR
The currently registered ID No, is 12345678912.
(10) ROM version
Format: 10RCR
The software version stored in ROM is transmitted as a 2-
digit number.
Example;
VORCR
41:CR
The version loaded in ROM is 1.1.
(11) Coin weight settings
Format: 11RCR
The amount of the standard coin is indicated in three
digits in units of cents. After this, set data for the six
types of coins will be transmitted in 18 digits (3 digits
each) in the sequence of CH1 coin, CH2 coin, CH3 coin,
CH4 coin, ChS coin and Ch6 coin. Each set value is indicat-
ed in a multiple of an integer of the standard amount. An
indication of "000" means that the channei is not used.
Example:
VIRCR
025004020000001000000:CR:
In the above example, the standard amount is 25 cents.
CH is set to $1, CH2 to $5, Ch3 is not used, Ch4 is set to
25 cents, and CHS and CH6 are not used.
{12} Credit rates
Format: 12RCR
The amount is indicated
in three digits. The number
of
credits to the amountis indicated in two digits for five pat-
terns, thus 25 digits in total. The first digit of the amount
represents the dollar amount and the last two digits
represent cents. An item for which no data is set will not
be indicated.
Example:
12RCR
100032000750018
:CR
In the above example, three patterns are set: $1 for 3
credits, $2 for 7 credits, and $5 for 18 credits.
(13) Number of times of cancellation by track skips
Format:
13RCR
The set skip counts and the counts until skipping is disa-
bled by cancellation are transmitted in a 4-digit
number.
Example:
13RCR
1002:CR
In the above example, the skip counts until cancellation is
set to 10, and the number of cancellation times is set to 2.
(14) Auto-play interval time
Format:
14RCR
The setting for auto-play interval time is transmitted as a
2-digit number.
Example:
14RCR
10:CR
'The auto-play interval time is set at 10 minutes in this example.
(15) Function switches
Format:
15RCR
The function switch settings are transmitted
(transmis-
sion sequence is function switch no. 1 through no. 8}.
Zero ("O"} indicates that the switch is OFF, while "1" indi-
cates that the switch is ON.
Example:
15RCR
07100100:CR
In the above example, the FUNCTION switches are set to
PAID PLAY, minimum playback, SAME DISC CONTINU-
OUS
PLAY
disabled,
album
selection
disabled, AUTO
PLAY disabied, BEST HITS AUTO PLAY, and 2400 bps for
the RS-232C communications rate.
49
Advertisement
