Advertisement
CASTER LOCKING:
The front casters are equipped with a locking mechanism.
Make sure to Sock the casters after installation as shown
in the figure.
Open the main unit door before caster locking.
{see page 6).
Locked
Lift the claw to unlock.
Lower the claw to fock. If
locking ts difficult, rotate the
wheel a little.
The vibration-protection of the CD changer is fixed with
three screws for shipping.
When transporting the CD changer, make sure to in-
(Remove the screws and spacer on the front center.
stall the screws for protection.
{Keep the removed screws in the pocket inside the main
unit door in case it becomes necessary to move the unit
again.)
@Remove those screws on both sides of the front, and in-
stall them to the holes indicated by the arrows.
15
Advertisement
