Pioneer Laser Juke CJ-V77 Owner's Manual page 44

ERROR CODE
Item Error code Option Description
CASH 00 — Trouble with coin channnel 1 acceptance"
ol ee Trouble with cain channne! 2 acceptance"
02 —= Trouble with coin channne! 3 acceptance*
03 near Trouble with coin channnei 4 acceptance*
04 — Trouble with coin channnel 5 acceptance~
05 Pam Trouble with coin channnel 6 acceptance*
06 — Trouble with $1 bill acceptance*
07 cae, Trouble with $5 bill acceptance"
PLAYER 20 Piayer number Command break
21 Disc number Search timeout
22 Disc number Defocus
23 Disc number No disc
24 Disc number Trouble with setup
25 Disc number impossible to return
26 Disc number Trouble with disc select
27 Disc number The select mechanism cannot return
COMMU- 40 Player number Disabled communication
NICATION 41 Player number Unknown code returned from the piayer,
with CDP 42 Player number The player did not recognize the command,
43° Se 'Undefined DRT fine
60 — Undefined FUNCTION switch
80 oe The menu did not rotate within 10 seconds,
* Input time of signal (bill) is too long.
Other
* Error code 00 - 99 Up to 100 codes
@ Option number
CD player number:
11 ~~ 36 for the first CD player
41 ~ 66 for the second CD player
71 ~~ 96 for the third CD player
Disc number: the upper two digits when entered.
{Examptes}
96: the lowest disc in the third CD player
11; the uppermost disc in the first CD player
Data can be uploaded/downloaded by using a personal
computer. See "Data Retrieval" for more details.
AFTER SETTING OF THE SERVICE MODE
After setting of the Service mode is completed, confirm
that the system operates correctly. Perform the following
operations after TOC initialization:
1. Set the HIGH POWER VOLUME and LOW POWER
VOLUME knobs to the MIN side.
2. Press the VOLUME (+) key of the remote control unit
to set to ~ 00 dB.
3. Put coins or bills.
* Check coins/bills.
4. Select songs after the TOC initialization.
* Check the song selection function.
5. Adjust the VOLUME knob to the maximum sound level
within the range of use.
44
6. Adjust tone by using the TONE CONTROL knob.
7. Check that the menu is correctly set for the disc, Con-
firm the data by using the data operated for checking.
8. Clear the data to delete the checking data.
* See "C6" of the Service mode.
9. Close the door.