12 CONTROL SUB FUNCTIONS
Setting item
Stop command
processing for
Cd.42
deceleration stop
selection
For details of the setting details, refer to Section 5.7 "Control data list".
[3] Setting method
To use the "stop command processing for deceleration stop function", set the
following control data in a PLC program.
The set data are made valid as soon as they are written to the buffer memory.
The PLC ready signal [Y0] is irrelevant.
Setting
value
Set the stop command processing for
deceleration stop function.
0: Deceleration curve re-processing
1: Deceleration curve continuation
Setting details
12 - 100
MELSEC-Q
Buffer memory address
1907