Toshiba D-R5SU Owner's Manual page 32

if your TV has component video inputs, you can obtain pictures in better quality.
f
To COMPONENT OUTPUT PB _I
f
To COMPONENT OUTPUT m'_"""_Y t _ _--To COMPONENT OUTPUT PR
ONENT OUTPUT ]
ound, connect an I
the audio output I
_._rminals,
TV or monitor equipped with (not supplied)
component video (INTERLACED/
PROGRESSIVE) inputs
To PRvideo input
To PBvideo input
-- jl I
J
32
[]
Component video outputs/inputs
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you
to enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex.Y, R-Y, R-B
or Y, CB, CR)
In some TVs or monitors, the color levels of the
playback picture may be reduced slightly or the tint
may change. In such a case, adjust the TV or monitor
for optimum performance.
, Make the following setting.
On-screen display Select Page
"Digital Output Mode' "PCM" or "Bitstream" _ page 49
To switch the output signal (Progressivellnterlaced)
V.0UT Press V.OUT button to change the
[_ video output signals (progressive and
interlace) from COMPONENT OUTPUT jacks.
When V.OUT button is pressed, the
resolution of HDMI OUTPUT is displayed on
the TV screen.
Notes
o Refer to the owner's manual for the TV to be connected to this recorder for more information concerning an
audio system.
If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place
the recorder away from the tuner and radio.
The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier's volume to
a moderate listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume
sound.
Turn off the amplifier before you connect or disconnect the recorder's power cord. If you leave the amplifier
power on, the speakers may be damaged.
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is
recommended that the user switch the connection to the "Standard Definition" output. If there are questions
regarding our TV set compatibility with this model 525p DVD player, please contact our Customer Service
Center.