Samsung HT-X250 Instruction Manual page 26

Settings (con,t)
Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
I In Stop mode, press the MENU button.
2 Press the Cursor v button to move to <Audio> and then press the ENTERbutton.
3 Press the Cursor v button to move to <DRC> and then press the ENTERbutton.
4
Press the Cursor A, _' button to adjust the DRC.
m When theCursor A button is
pressed,
theeffect i sgreater, andwhen theCursor T button is
pressed,
theeffect i ssmaller.
_" Press the RETURN button to return to the previous level.
_ Press the EXIT button to exit the setup screen.
i Setting the AV SYNC
Video may look slower than the audio if it is connected to a digital T_Z If this occurs, adjust the audio delay time to to match
the video.
I In Stop mode, press the MENU button.
2 Press the Cursor v button to move to <Audio> and then press the ENTERbutton.
3 Press the Cursor T button to move to <AV-SYNC> and then press the
ENTER button.
4
Press the Cursor A,'T button to select the AV-SYNC Delay Time and then
press the ENTER button.
[] You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status
_" Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
J Setting the HDlVllAudio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF
1 In Stop mode, press the MENU button.
2 Pressthe Cursor v button to move to <Audio> and then press the ENTERbutton.
3 Press the Cursor T button to move to <HDMI AUDIO> and then press the
ENTER button.
4
Press the Cursor A, 'v' button to select <ON> or <OFF> and then press the
ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMt AUDIO is automatically down-mixed to 2ch for TV speakers.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
50 51