Samsung AC Series Install Manual page 126

Set up screen when installing Side by Side, Method 2 – LSM
□ Settings for each SET
② IP connection in LSM
Case 2) Write SLED IP Success, Write Cabinet IP Ready
Case 2
Write SLED IP – Success
Write Cabinet IP – Ready
IAB/IAC
Factory – Control – TheWall Option –
Manager/Network – SLED IP setting
1st Octet
2nd Octet
3rd Octet
SLED 4th Octet
Cabinet Start 4th Octet
Write SLED IP Success
Write Cabinet IP Ready
1) Write the IP of the SET >
'Add' Click
3) Release a connect with existing settings
192
168
176
51
111
125
If there is a SET setting with the same IP
in the network, IP conflict may occur
2) Model type 'All In One' Click
Release a connect with existing settings
4) Repeat 1 to 3 times to connect all SETs
of Ips to the LSM
LED R&D Lab(VD)