GE Tec 6 Plus Operation And Maintenance Manual page 59

Operating Instructions
À WARNING Grip the bottle firmly while rotating it downwards from the
upper stop position to the lower stop position and hold the
bottle firmly in the filler port until the small amount of agent
in the system has drained back into the bottle. Failure to do
so may result in spilling agent.
Step 5
Drain the bottle and remove.
¢ Grip the bottle firmly and
lower it from the upper stop E
position to the lower stop
position.
・ When the bottle reaches KC
the lower stop position,
hold the bottle firmly in the
filler port for at least five
seconds to allow the small
amount of agent in the filler
system to drain back into
the bottle.
. To avoid dropping the
bottle, support the bottle as —s
itis automatically unlocked
from the filler port and EE
released from the filler. 5 sec
Note: Do not twist the
bottle as you pull the
bottle out
e The valve on the bottle
automatically closes to
help avoid loss of agent. Figure 5-18 « Removing the bottle
1107-0641-000 1/23/01 5-17