Husqvarna X-SYNC Operator's Manual page 8

To charge the product
1. Connect the USB-C connector on the charger cable
to the outlet on the left earmuff.
2. Connect the USB connector on the charger cable to
a USB charger or other USB power outlet.
Note:
The output of the power outlet must be 5 V
and 2 A to charge at maximum capacity.
Note:
The LED indicator on the Bluetooth
flashes slowly green when the battery is charging.
The LED indicator on the Bluetooth
green when the battery is fully charged.
To start the product
• Push and hold the on/off button for 1 second.
Note:
A beep sound tells you that the product is
on. An audio message tells you the battery status
and the quantity of devices that are connected with
®
Bluetooth wireless technology.
Audio message
BATTERY HIGH
BATTERY MEDIUM
BATTERY LOW
BATTERY CRITICAL
Audio message
ONE BLUETOOTH DE-
VICE CONNECTED
TWO BLUETOOTH DEVI-
CES CONNECTED
8
®
button
®
button is solid
LED indicator on the
®
Bluetooth button
LED is blue.
To change between FM radio mode and
®
Bluetooth mode
• Push the mode button quickly 2 times to change
between FM radio mode and Bluetooth
Note:
An audio message tells you which mode
you have selected. Refer to the table below.
Audio message
RADIO
BLUETOOTH
FM radio mode
In FM radio mode you get access to FM radio.
To change FM radio station
• Push and hold the volume up button or the volume
down button for 1 second to change FM radio
station.
®
Bluetooth mode
®
In Bluetooth mode you can connect your product to a
®
device with Bluetooth wireless technology.
®
To do a Bluetooth
1. Push and hold the Bluetooth
to start the pairing operation on your product.
Note:
The pairing operation starts when you hear
a beep sound and the Bluetooth
blue. The pairing operation is on for 30 seconds.
2. Start the pairing operation for Bluetooth
technology on the device.
3. If it is necessary, select Husqvarna X-COM Active in
the list of units on your device.
Note:
An audio message tells you about the
product status. Refer to the table below.
Audio message LED indicator on
the Bluetooth
button
BLUETOOTH Solid blue.
DEVICE CON-
NECTED
BLUETOOTH Solid red for 2
CONNECTION seconds.
FAILED
®
mode.
pairing operation
®
button for 2 seconds
®
button flashes
®
wireless
Information
®
The product is
connected to a
device with Blue-
®
tooth wireless
technology.
The product is
not connected to
a device with
Bluetooth
less technology.
2146 - 003 -
®
wire-