Siemens SINAMICS S120 Equipment Manual page 553

Components for the forming circuit (recommendation)
● 1 fuse switch 3-phase 400 V/10 A
● 3 incandescent lamps 230 V/100 W
● Various small components, such as lamp socket, cable 1.5 mm
Figure 10-1
Booksize power units
Manual, (GH2), 06/2008, 6SL3097-2AC00-0BP6
DANGER
Dangerously high voltage levels are still present in the cabinet up to 5 minutes after it
has been disconnected due to the DC link capacitors. It is only permissible to work on
the equipment or at the DC link terminals after this time has expired.
Note
Line Modules must be enabled from the connected Motor Module.
Line Module interface
Service and Support Booksize
10.3 Forming the DC link capacitors
, etc.
2
553