Table of Contents
Advertisement
LUNA2000-200KTL-H0 Smart Power Control System
User Manual
●
Drilling Holes
When drilling holes into a wall or ground, observe the following safety
precautions:
●
●
Moving Heavy Objects
●
●
1.6 Maintenance and Replacement
High voltage generated by the equipment during operation may cause an electric
shock, which could result in death, serious injury, or serious property damage.
Prior to maintenance, power off the equipment and strictly comply with the safety
precautions in this document and relevant documents.
●
●
●
●
●
Issue 05 (2022-06-30)
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
–
Keep your body steady.
–
Do not climb higher than the fourth rung of the ladder from the top.
–
Ensure that your body's center of gravity does not shift outside the legs
of the ladder.
Wear goggles and protective gloves when drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent
injuries.
D ANGER
Maintain the equipment with sufficient knowledge of this document and
using proper tools and testing equipment.
Before maintaining the equipment, power it off and follow the instructions on
the delayed discharge label to ensure that the equipment is powered off.
Place temporary warning signs or erect fences to prevent unauthorized access
to the maintenance site.
If the equipment is faulty, contact your dealer.
The equipment can be powered on only after all faults are rectified. Failing to
do so may escalate faults or damage the equipment.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
6
Advertisement
Table of Contents
