Yamaha PX-2 Owner's Manual page 9

© UP (Cueing-UP Switch)
Depress this switch to discontinue play temporarily.
The tonearm wil! be lifted, removing the sylus tip
from the disc surface.
(6 DOWN (Cueing-DOWN Switch)
Depress this switch to start play midway on a
disc. The tonearm will lower itself, bringing the
stylus tip in contact with the disc surface.
* When the UP switch, or DOWN switch is depres-
sed, you will hear click. This is neither an ab-
normal noise, not an indication of discorder,
but a sound produced by the operating solenoid
for cueing. Be careful not to depress the UP
switch while the tonearm is descending, as it
may cause the tonearm to fly when the "click"
of the operating solenoid is heard.
D >/»» (Rightward Feed Switch for
Tonearm)
The tonearm will be fed toward the right for the
duration this switch is being depressed. When this
switch is slightly depressed, the tonearm will move
slowly, wheras, when depressed to a further depth,
the tonearm will move quickly.
* The tonearm will come to a halt once it reaches
the extreme right, and the platter will stop
rotating.
AUTOMATIC PLAY
CUT (Play Discontinuing Switch)
Whenever this switch is depressed, the tonearm
will start RETURN movements, whatever opera-
tion mode it may be in.
(© REPEAT (Repeat Switch)
Repeat play is possible by depressing this switch,
in line with the disc play controlled by the PLAY/
DISC SIZE switch ( 40 ).
During REPEAT play, the indicator located above
the switch will illuminate. To end REPEAT play,
depress this switch once again.
" For performances initiated with the ARM
CONTROL switches ( through (7) ), RE-
PEAT play is not possible even when this switch
is depressed.
PLAY/DISC SIZE (Disc Size Switch)
This switch makes possible automatic play, by
selecting the disc size (17 cm, 25 cm or 30 cm).
When any one of the switches is depressed, the
indicator of the selected size will illuminate, and
the whole process from the starting of platter, arm
feed, cueing-DOWN, play, auto-return to stop will
be automatically performed.
Be careful not to make a mistake in selecting
the disc size; damage to the cartridge and stylus
tip may result when the wrong disc size is se-
lected.
When any one of the ARM CONTROL switches
( through (7) ) is depressed, automatic play
will be completely released.
(Ď Arm Height Adjusting Knob
After loosening the lock control provided on the
right-side of the tonearm, adjust the arm height,
using the left-side A UPand V DOWN controls.
On completion of adjustment, lock the arm firmly
by means of the LOCK A control.
(2 Main Weight & BALANCE Control Knob
This control functions to balance the tonearm.
When the control is turned counterclockwise
(leftward) as viewed from the front of the tonearm,
the main weight will move forward, and when the
control is turned clockwise, the main weight will
move backward.
13 Tracking Force Adjusting Weight
This determines the tracking force. Tonearm ba-
lance adjustments are performed by matching the
forward end of the weight with the "0" line.
(The forward end of the weight will be the basic
line used for determining the tracking force.)