6.10 Carburetor
6.10.1 To disassemble the Carburetor
1. Place a suitable container under the carburetor. Turn
the fuel valve lever (A) to the ON position. Loosen
the drain screw (B) and drain the fuel.
OFF
Figure 1
B
Figure 2
2. Remove the star nut (C) and remove the air cleaner
3. Remove the wing nut (E) and remove the air filter
4. Remove nuts (G) and screw (H), remove the air filter
5. Remove gasket (K).
6. Pull the carburettor (L) to a point where the groove
A
7. Remove gasket (M), insulator (N) and gasket (O).
ON
cover (D)
(F)
housing (I) and breather tube (J).
of the throttle arm lines up with the governor rod
and then lift the governor rod out of the hole of the
throttle arm and unhook the throttle return spring.
O
M
L
K
H
J
Figure 3
Repair instructions
C
O
E
F
I
G
English - 21
D