Advertisement
Available languages
Available languages
Recirculation Pump Kit
Selecting the recirculation settings
This section only applies to the Greentherm 9000 indoor
models.
Fig. 6
SA - Settings
This menu provides access to several parameters.
▶ Touch the symbol
▶ Touch the symbol
▶ Touch the symbol
▶ Use the symbols
information/adjustments menus, until A1 Recirculation
appears in the display.
▶ Touch the symbol
A1 Recirculation
Choosing a recirculation program:
▶ Use the symbols
– HR House Recirculation
– TL Tank Loading
– OFF Off
HR House Recirculation
It is recommended to set a schedule that
matches use pattern to save energy and
improve performance.
Creating a Schedule:
▶ Touch the symbol
▶ Touch the symbol
Display shows week days.
▶ Touch the symbol
▶ Use the symbols
or
▶ Touch the symbol
▶ Use the symbols
hour.
▶ Touch the symbol
▶ Use the symbols
6 720 819 502 (2023/09)
to enter the menus.
until the display shows SA Settings.
.
or
to scroll through the
to select A1 Recirculation menu.
or
to scroll through the options.
, to select Schedule.
, to enter the programming menu.
, to select a week day.
to choose option Add New.
, to enter the recirculation program.
or
to choose the beginning
, to set the beginning hour.
to choose the end hour.
▶ Touch the symbol
A recirculation period is defined.
The user can add additional recirculation periods on the
same day.
▶ Touch the symbol
steps mentioned above.
Copying recirculation program,
The user can copy the recirculation period(s) to other days of
the week.
▶ Use the symbols
to be copied.
▶ Use the symbols
▶ Touch the symbol
Display shows week days.
▶ Touch the symbol
▶ Use the symbols
When week days are selected,
▶ Touch the symbol
▶ Touch the symbol
Deleting a recirculation program,
▶ Use the symbols
to be deleted.
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
period.
▶ Touch the symbol
▶ Touch the symbol
AA Always Active
The recirculation logic will only use the internal NTC to control
the recirculation pump.
▶ Touch the symbol
Recirculation will be always active.
TL Tank Loading
▶ Touch the symbol
Display shows following menu.
– External NTC
– Internal NTC
– Aquastat
Select the menu according with the installation.
7 736 504 585
, to set the ending hour.
, to select Add New and repeat all
or
to select the day of the week
or
to choose option Copy to.
.
to select the day of the week.
or
to choose another week day.
to validate operation.
to exit.
or
to select the day of the week
.
or
to choose option Delete.
.
or
to choose a recirculation
twice to delete recirculation period.
to exit.
to select ON.
.
5
Advertisement
