Table of Contents
Advertisement
Mounting Example 3:
installation using the holder
Dashboard
After inserting the holder into the
dashboard, then select the
appropriate tabs according to the
thickness of the dashboard
Dashboard
Screw
(2.6 x 6 mm)
Pass the cord
through the
holder.
Mounting base
Fig. 15
Installing the Hide-away Unit
-
Before installing the Hide-away unit,
refer to "Operation Mode" on page 4 to
set the PRO/STD switch.
Mounting example 1:
Mounting the Hide-away unit on the car
mat with Velcro tape
Apply velcro tape to the bottom of the
under the seat.
Car mat
Velcro tape (Round
surface) Remove the
oil-paper from the
back and attach.
Fig. 16
Mounting example 2:
Installation of mounting bracket
1. Attaching the Brackets. (Fig. 17)
"Screw
(4x
8 mm)
Bracket
Fig. 17
ho
. For Installation to Car mat or Chassis.
(Fig. 18)
Tapping screw
(4 x 12 mm)
?
Car mat or
chassis
Drill 2to 2.56 mm
diameter holes
Fig. 18
Advertisement
Table of Contents
