Pioneer DEQ-9200 Owner's Manual page 10

Mounting Example 1:
Fasten the control unit with Velcro tape
* Thoroughly wipe off the surface before
affixing the Velcro tape.
Velcro tape (Soft
surface) Remove
the oil-paper from
the back and attach.
Console, etc.
Mounting base
Velcro tape (Round
surface) Remove the
oil-paper from the
back and attach.
Fig. 9
on nen ean centenarians aa teeeeees ae
10
Mounting Example 2:
Installation of mounting bracket
1. Temporarily assemble the bracket.
(Fig. 10)
(4x6 mm)
Fig. 10
2. Use screws (3 x 4 mm) to install the
bracket to the mounting base. (Fig. 11)
Screw (3 x 4 mm)
Mounting base
Fig. 11
(Fig. 12)
Console, etc.
Drill 2 to 2.5 mm
diameter holes
Wood screw
(4 x 16 mm)
Mounting base
Fig. 12
Fixing the Front Panel
The front panel can be fixed to the
mounting base using screws in the
procedure described in Examples 1 and 2.
(Fig. 13)
Mounting base
Screw
Front panel
Fig. 13