Advertisement
Model 11869A
General Information
SECTION
?
-a.
1"1.
INTRODUCTION
1-2.
This Operating and Service Manual contains information required
to install, operate,
test, and service the Hewlett-Packard model
11869A RF Plug-In Adapter. Figure 1-1 shows the model 11869A and the
latch handle and standard BNC Plug-In interconnect cables shipped
with the instrument. Also shown in Figure 1-1 are the semi-rigid
rear-panel AUX OUT cable and connector for the model 86290 Plug-Ins.
1-3.
This Manual is divided into eight sections, which provide the
following informations
a.
SECTION I, GENERAL INFORMATION,
includes a brief description of
the instrument,
the operating characteristics, safety
considerations, optional extras available, and a list of
recommended test equipment.
b.
SECTION II, INSTALLATION, provides instructions for initial
inspection, preparation for use,
installation, storage,
packaging, and shipment.
c.
SECTION III, OPERATION, presents information concerning the
operating controls of the instrument.
d.
SECTION IV, PERFORMANCE TESTS, presents procedures to verify that
the instrument is functioning correctly.
e.
SECTION V, ADJUSTMENTS. There are no electrical adjustments in
the 11869A.
f.
SECTION VI, REPLACEABLE PARTS, provides information required to
order all replaceable parts and assemblies.
g.
SECTION VII, MANUAL BACKDATING CHANGES, provides backdating
information to make this Manual compatible with earlier shipment
configurations.
h.
SECTION VIII, SERVICE, provides a key to component symbology,
a
table of mnemonics, an overall block diagram, circuit
descriptions,
schematic diagrams, component location diagrams,
and troubleshooting information.
1-1
Advertisement
