Advertisement
Model 11869A
General Information
1~22„
SPECIAL PROM MODULE
1-23.
For RF Plug-Ins with non-standard frequency coverage
(models
not listed in Table 1-1), a special matching PROM module must be
installed in the 11869A. Consult your HP Sales and Service Office for
HP Part Numbers of PROMs for
individual factory modified Special
Plug-Ins.
1-24.
LATCH HANDLE KIT
1-25.
A kit containing a latch handle and mounting hardware for
installing the 86200 series RF Plug-In in the 8350A Sweep Oscillator
is supplied with the 11869A. Additional latch handle kits can be
ordered using HP Part Number 11869-60007. The latch handle kit is
shown in Figure 1-1.
1-26.
OPTION 910, EXTRA MANUAL
1-27.
The standard instrument is supplied with one Operating and
Service Manual. Option 910 instruments are supplied with two Manuals.
1-28.
RECOMMENDED TEST EQUIPMENT
1-29.
Equipment required for testing the 11869A RF Plug-In Adapter
is listed in Table 1-2. Other equipment may be substituted if
it
meets the critical specifications listed in the Table.
Table 1-2.
Recommended Test Equipment
CRITICAL SPECIFICATIONS
USE*
86200 series
RF Plug-In
Any RF Plug-In listed in Table 1-1
will check the interface. However,the
86290A/B/C is recommended so that
the band changing function may be checked.
8350A Sweep
Oscillator
No substitute
1740A
Oscilloscope
Dual channel,
external sweep capability
8470B Crystal
Detector
Frequency response 0.01 to 18 GHz
P,T
Adapter
Type N
(m)
to BNC
(f)
P ?T
Equipment for
Residual FM
Test
See Operating and Service Manual for
RF Plug-In used.
P
,
T
*P=Performance Test
T=Troubleshooting
1
-
7
/
1-8
Advertisement
