Selecting An Installation Configuration; Dhw Tank Configurations; Dimensions - Hitachi YUTAKI S80 Series Installation And Operation Manual

INSTALLATION

7.2 SELECTING AN INSTALLATION CONFIGURATION

7.2.1 DHW tank configurations

DHW tank has the following installation configuration possibilities with the YUTAKI S80 indoor unit:
A) Indoor unit with HITACHI tank
(Tank integrated over the indoor unit)
Depending on the configuration type, the installation procedure will be different.

7.2.2 Dimensions

N O T E
• Height dimensions are shown with the minimum mounting
foot height. These values can be adjusted up to +30 mm.
• All dimension in mm.

Indoor unit with HITACHI tank (Tank integrated
over the indoor unit)
RWH-(4.0-6.0)FS(V)NFE +
DHWS195S-2.0H1E
25 PMML0291A rev.2 - 09/2014
B) Indoor unit with HITACHI tank
(Tank beside the indoor unit)
RWH-(4.0-6.0)FS(V)NFE +
DHWS260S-2.0H1E
I M P O R TA N T N O T E
• All the installation information about DHW connec-
tion is explained in this chapter.
• The installation information about the space heating
connection and indoor unit refrigerant / wiring con-
nection is explained in the section
(Without tank) of the
operation manual.

Indoor unit with HITACHI tank (Tank beside the
indoor unit)
RWH-(4.0-6.0)FS(V)NFE + DHWS195S-2.0H1E
RWH-(4.0-6.0)FS(V)NFE + DHWS260S-2.0H1E
Indoor unit alone
YUTAKI S80 Installation and