Advertisement
Recalling a Registration
1. Press the REGIST. button.
шша
REGIST.
The menu below will be displayed.
Select
REGIST.
1234567891011
1 13141516
2. Press the D or <I button to position the cursor under
the number of the desired registration.
Select
3. To recall the selected registration, press the REGIST.
button again.
5
TA
EEE
The message below will be displayed for a few seconds.
Recalling...
REGIST.
=
|
ı Registrations can also be stored in the MDR.
| When you connect the CVS-10 to an MDR (Music Disk Recorder) and
| then perform recording at MDR in Normal mode, the data of the
| Registrations in the currently selected Bank at CVS-10 will be
|
|
|
|
|
memorized onto the MDR's disk.
In addition, when playback at MDR is performed in Normal mode,
the registrations stored on the MDR's disk will be saved in the
currently selected Bank at CVS-10 (and the previous data in that
Bank will be erased).
REGIST.
12345678910111213141516
REGIST.
SOUND MEMO
16
If you wish to switch to another Bank
before selecting a Registration No.,
perform Steps 2, 3, and 4 of "Memo-
rizing a Registration" (page 14), before
performing Step 1 on the left.
[Additional Information]
E Registrations 1-16 of the GENERAL Bank are
all provided
with
preset
Registration
data
(GENERAL PRESETS). If you wish to recall a
GENERAL
Registration, select the GENERAL
Bank first by performing Steps 2, 3, and 4 of
"Memorizing a Registration" (page 14).
If you select a different REGISTRATION
MEMORY
number
at the Electone,
however, the current Registration No.
at the CVS-10 will also change to that
same number. Be sure to set each of the
CVS-10's Registration No. to the same
Registration
No.
at
the
Electone
(REGISTRATION MEMORY) that you
wish to use at the same time.
[Additional Information]
If a disk has been used to record a performance
using an Electone+CVS-10+MDR system, that
disk cannot
be played back when
using an
Electone+ MDR system (without the CVS-10).
Advertisement
