Advertisement
4. Select the TREMOLO/CHORUS
mode.
=m
=
TREMOLO
CHORUS
as >
TREMOLO ON: The Tremolo effect is enabled (Tremolo mode).
CHORUS ON:
Тһе Chorus effect is enabled (Chorus mode).
Both OFF:
A Tremolo effect without trilling of the notes is
enabled.
5. Set the Tremolo Speed by pressing the TREMOLO
button while you hold down the M./SHIFT button.
=
7
=
M./SHIFT
f
TREMOLO
Ў
SPEED
The currently set Tremolo Speed will appear on the display.
TREMOLO
SPEED
VALUE=24
6. Press the A or V button to adjust the Tremolo
Speed.
TREMOLO
SPEED
VALUE=15
7. When the desired setting is displayed, press the
M./SHIFT button.
с=з
M./SHIFT
11
{Additional Information]
Ш Тһе
ON/OFF
status of the Tremolo/Chorus
effect for each keyboard is set at Step 1. No
matter
which
mode
you
choose
in Step 4,
therefore, the effect will not be added to the
keyboard which was turned OFF in Step 1.
[Additional Information]
E The Tremolo Speed can be set within a range of
0 (MIN) to 24 (MAX).
E To select the Tremolo Speed or Foot Switch
control function, you must press the TREMOLO
or CHORUS
button while holding down
the
M./SHIFT button.
A button: Increase the Tremolo Speed.
V button: Reduce the Tremolo Speed.
[Additional Information]
E Even
after
you
turn
OFF
the
CVS-10's
POWER switch, this Tremolo Speed setting will
remain unchanged.
Advertisement
