Advertisement
01. Introduction
Our Advanced series A35UH consists of ultra-small connectors with a
0.35
mm, a
is designed for board-to-FPC connections that require a more space-saving and high
current connector than our A35S Series.
For this purpose, the size and thickness of the molded part has been further reduced.
Select the types best suited to the conditions of use. Read this document before
designing a product and starting production.
Space-
saving
Low
profaile
High
current
Wiring
underneath
Contact
reliability
Drop
resistance
Mountability
Clicking
feedback
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors A35UH
stacking height of
0.6mm, and a
A35UH
Excellent
Width:
2.2mm
2.2mm
Excellent
0.6mm
Mated height
0.6mm
Power terminal
5A in two location
Excellent
With
power terminal
(Max 10A at total)
Good
Exposed metal
part on the
rear face
Excellent
Bellows-type
contact
Very good
With a thin plastic part
Header
pickup
Excellent
apace:
0.8mm-
Header needs
wide
special nozzle
bottom
Excellent
shorthand width of 2.2
Very good
Width:
2.5mm
Very good
Mated height
0.8mm
Good
No
power terminal
(Max 4A at total)
Signal terminal
0.3A/Pin
Good
Exposed metal
Exposed
part on the
metal part
rear face
Excellent
Very good
Very good
Header needs
special nozzle
Excellent
©
- 2 -
Panasonic Corporation 2017
terminal pitch of
mm. This connector
A35S
2.5mm
0.8mm
Signal terminal
0.25A/Pin
Exposed
metal part
Bellows-type
contact
With a thin plastic part
Header
pickup
apace:
0.7mm-
wide
bottom
ACCTF32E 201704
Advertisement
