Advertisement
01. Introduction
Our Advanced series A4S consists of ultra-small connectors with a
mm, a
stacking height of
designed for board-to-FPC connections that require a more space-saving connector than
our F4 and F4S Series.
For this purpose, the size and thickness of the molded part has been further reduced.
Select the types best suited to the conditions of use. Read this document before
designing a product and starting production.
Excellent
Space-
saving
Width:
2.5mm
Excellent
Low-profile
Mated height
0.8mm
Good
Wiring
Exposed
underneath
metal part on
the rear face
Contact
Excellent
reliability
Drop
Very good
resistance
Very good
Header needs
special nozzle
Mountability
Clicking
Excellent
feedback
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors A4S
0.8mm, and a
A4S
Very good
2.5
Width:
mm
3.6mm
Very good
0.8mm
Mated height
1.0～1.2mm
Good
Exposed metal
part on the
Exposed
rear face
metal part
Ultra slim but
highly-reliable
Excellent
V-notch and
double contact
Bellows-type
contact
Very good
Thin plastic part
Very good
Header
pickup
Header needs
space:
special nozzle
Pick up the
0.7mm-
wide
bottom.
Excellent
- 2 -
shorthand width of 2.5
mm. This connector is
F4S
Very good
3.6
mm
Very good
1.0 ～
1.2mm
Mated height
Excellent
Exposed
metal part
Excellent
V-notch and
double contact
Bellows-type
contact
Excellent
Thin plastic part
Excellent
Header
pickup
No pick up
space:
cover
Pick up the
0.8 mm-
wide
bottom.
Very good
©
Panasonic Corporation 2015
terminal pitch of 0.4
F4
5.0
Width:
mm
5.0mm
0.9mm
0.9mm
No exposed
metal part
double contact
Bellows-type
contact
Header
pickup
space:
2.3 mm-
wide.
ACCTF6E-2 201506
Advertisement
