Brother HL-L9300CDW Service Manual page 265

(14) Remove the Taptite cup S M3x6 SR screw and remove the LT solenoid holder ASSY from
the LT frame L unit.
(15) Remove the Gear 46 from the LT frame L unit.
LT frame L unit
LT solenoid holder ASSY
Taptite cup S M3x6 SR
(16) Turn the LT frame L unit upside down.
(17) Remove the two Taptite cup S M3x6 SR screws from the LT beam front.
Taptite cup S M3x6 SR
LT beam front
Gear 46
14
<Left side>
Fig. 3-176
Fig. 3-177
3-124
15
<Left side>
Confidential