Electrolux SkyLine PremiumS User Manual page 77

Anom- Type of
Description
aly anomaly
SCbL Stops Appliance is ON but
cleaning ON/OFF switch feed-
N°107
back still OFF
tCMS Stops TC software version
oven; fatal (inside ACU board)
N°117
error incompatible with
present UI SW version
Hod0 Hood level Level 2, 3, 4: Malfunc-
2 Electric tion on hood motor
N°600
oven: regulator
Warning
Hood level
2 gas
oven:
stops oven
Hood level
3 (Electric
only):
Warning
Hood level
4 (Electric
only):
stops oven
hod1 Warning Level 4 only: Hood's
UV lamp compartment
N°601
open
Hod2 Warning Level 4 only: Hood's
UV lamp compartment
N°602
open
Hod3 Warning Level 4 only: Hood's
water separator filter
N°603
missing
hod5 Warning Level 4 only: Hood's
lamp 1 missing or not
N°605
working
hod6 Warning Level 4 only: Hood's
lamp 2 missing or not
N°606
working
UPrb Stops oven USB Food Probe miss-
ing or removed during
N°620
cooking
Urt2 Stops oven The RTC stopped flag
is active even after the
N°112
power on recovery
procedure
Urt3 Stops oven The RTC internal oscil-
lator is malfunctioning
N°113
USdC Stops oven Error during creation of
a directory on the USB
N°154
key
USFC Stops oven Error during closure of
a file on the USB key
N°151
Possible causes
• Wiring-Connection loose
Wrong software upload
(example: after replacing
ACU board)
Hood's Electrical power
supply off
• Hood Fan safety thermo-
stat over temperature
• Automatic Controller
damage
• Hood/oven interface
cable disconnected or
damaged
UV-C lamp's cassette are
not in right position
The cover panel of central
technical compartment (UV-
C) is not in
appropriate position or is
not properly closed
The Demister and Water
Separator Filter are not in
appropriate position
Hood's UV-C lamp 1 and/or
2 missing or not working
Hood's lamp 3 and/or lamp
4 missing or not working
The USB food probe is not
correctly plugged
Actions
The appliance is ON but the ON/OFF switch
shows still OFF. Cooking still possible. The
cleaning is blocked for safety reason.
• Try to switch the oven OFF/ON. If the alarm
persists, it is still possible to operate cooking,
but it is recommended not to start any clean-
ing cycle until the service will have resolved
the issue.
• Clean manually the oven and call Service.
TC software version (inside ACU board) incom-
patible with present UI SW version.
• Call service
Restart oven.
If the causes persist, error will appear again, Call
service.
Restart oven.
If the causes persist, error will appear again, call
service.
Restart oven.
If the causes persist, error will appear again, call
service.
Restart oven.
If the causes persist, error will appear again, call
service.
Restart oven.
If the causes persist, error will appear again, call
service.
Restart oven.
If the causes persist, error will appear again, call
service.
Ensure the USB food probe is correctly plugged.
Call service.
Internal clock permanently locked.
Call service.
Clock oscillator failure.
Call service.
Error during creation of a directory on the USB
key.
• Try with another USB key.
Error during closure of a file on the USB key.
• Try with another USB key.
77